Examples
Here are examples of how to use the
oakcli configure oda_base
command.
Changing the CPU Core Count in ODA_BASE
Change the CPU core count from six to eight in ODA_BASE:
# oakcli configure oda_base
Core Licensing Options:
1. 2 CPU Cores
2. 4 CPU Cores
3. 6 CPU Cores
4. 8 CPU Cores
5. 10 CPU Cores
6. 12 CPU Cores
Current CPU Cores :6
Selection[1 : 6](default 12 CPU Cores) : 4
ODA base domain memory in GB(min 8, max 88)(Current Memory 64G)[default
32] :
INFO: Using default memory size i.e. 32 GB
Additional vlan networks to be assigned to oda_base? (y/n) [n]:
Vlan network to be removed from oda_base (y/n) [n]
INFO: Node 0:Configured oda base pool
INFO: Node 1:Configured oda base pool
INFO: Node 0:ODA Base configured with new memory
INFO: Node 0:ODA Base configured with new vcpus
INFO: Changes will be incorporated after the domain is restarted on Node 0
INFO: Node 1:ODA Base configured with new memory
INFO: Node 1:ODA Base configured with new vcpus
INFO: Changes will be incorporated after the domain is restarted on Node 1
Changing the Amount of Memory Allocated to ODA_BASE
1. Log in to Dom0.
2. Execute the
oakcli configure oda_base
command and change the configuration.
3. Restart ODA_BASE.
Assigning VLANs to ODA_BASE
1. Log in to Dom0.
2. Execute the
oakcli configure oda_base
command.
3. Change the setting for
Additional vlan networks to be assigned to
oda_base? (y/n)
to y.
4. Follow the prompts to assign additional VLANs to ODA_BASE.
5. Restart ODA_BASE.
oakcli configure repo
Use the
oakcli
configure repo
command to increase the size of a shared repository.
Syntax
oakcli configure repo reponame -incsize size [M|G] [-h]
Chapter 14
oakcli configure commands
14-12
To Next Page
Loading...
Need help?
General