2. Click the Database tab, and then click Patch on the left pane.
3. Click Patch, and then select the Action as Precheck to run pre-checks before
patching the database.
Click Activity for job status.
4. On the Patch page, for the database to be patched, click View and select Pre-
patch reports to view the pre-check report. Fix any errors, and then select Action
as Apply to patch the database.
5. Verify that the patching job completes successfully.
Related Topics
• Patching Oracle Database Appliance Bare Metal Systems Using the Command-
Line
Follow these steps to apply patches to Oracle Database Appliance OAKCLI bare
metal system using CLI commands.
Patching Oracle Database Appliance Bare Metal Systems
Using the Command-Line
Follow these steps to apply patches to Oracle Database Appliance OAKCLI bare metal
system using CLI commands.
1. Download the Oracle Database Appliance Server Patch for the ODACLI/DCS
stack (patch 28864520) from My Oracle Support to a temporary location on an
external client. Refer to the Oracle Database Appliance Release Notes for 18.3,
for details about the software for the latest release.
For example, download the Oracle Database Appliance Server Patch for
ODACLI/DCS Stack for 18.3
p28864520_183000_Linux-x86-64_1of3.zip
p28864520_183000_Linux-x86-64_2of3.zip
p28864520_183000_Linux-x86-64_3of3.zip
2. Copy the software files from the external client to Oracle Database Appliance. For
two-node systems, ensure that you copy the software files to both nodes. Use the
scp
or
sftp
protocol to copy the bundle.
Example using
scp
command:
scp software_file root@oda_host:/tmp
Example using
sftp
command:
sftp root@oda_host
Enter the
root
password, and copy the files.
put software_file
Chapter 7
Patching Oracle Database Appliance Bare Metal Systems Using the Command-Line
7-8
To Next Page
Loading...
Need help?
General