Adjutsing Rotary Feeder Separator Pin Positions
Separator pins are adjusted to be more or less exposed. To adjust their position:
1. Turn the knurled knobs located on the back of the center gate to adjust each separator pin.
2. Use the table in this topic to determine the proper pin setting based on the type of material you are
running.
Separator Pin Adjustment Screws
Note:
The pins are all the way exposed for most applications.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 130 of 328
To Next Page
Loading...