Folded, Perfume, BRE
Issue Cause Resolution
Double feeds Material orientation Folded: closed and first, curl up
BRE: flap up and leading
Perfume: flap up
Backstop set to loose Reset backstop and verify the lead edge of the
material is at the front wall
Move deck toward lead edge to stiffen the
material
Fail to feed Material orientation Folded: closed and first, curl up
BRE: flap up and leading
Perfume: flap up
Lead edge is poorly justfied Tamp lead edges even prior to loading
Material is pinched at separation pins Increase deck angle to remove excessive
weight from pins
Backstop / side guides set too tight,
preventing material from falling onto the
pins
Reset and/or loosen side guides
Material too stiff Move deck away from the lead edge to the
next greater setting
Troubleshooting
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 255 of 328
To Next Page
Loading...