Packaging
Packaging of enclosures should not result in curling, creasing, folding or damage to edges of enclosure.
Stacking
Enclosures should be packaged in a way that will hold stacks even on the edges – uneven stacking can
result in unacceptable edge curl.
Uneven stacking with offset edges can result in unacceptabe curl (see diagram).
Stacking with Offset Edges Results in Curled Edges
Banding
l Bands should be loose enough to prevent scoring or creasing the paper.
l Paper bands are preferred to rubber bands.
l Cardboard chips at the top and bottom of each banded stack greatly reduce the chance of
enclosure damage and allow for tighter bands to be used.
l Enclosures should be free of paper shards, excessive dust, and powder.
Options
The Friction Feeder can be configured with these scanning options:
Option PCN
Barcode Scanner Y551
Area Scan Camera Y55B
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 299 of 328
To Next Page
Loading...