Identify Envelope Flap Information
There are two ways to identify the flap delta of an envelope. The easiest way is to use the Flap Delta
Envelope Guide Template. If the template is not available, you can use a scale and envelope
measurements to identify the flap delta.
Use this information as a reference to enter the proper envelope settings into DC for your job.
Using the Flap Delta Envelope Guide Template
To identify the envelope flap delta using the flap delta envelope guide template (SV63174):
1. Lay the envelope flap template on a flat surface.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 73 of 328
To Next Page
Loading...