Planmeca Compact I - Page 152

Chapter G - PARTS REPLACEMENT & REPAIR
G-2 Planmeca Compact i
REMOVING COVERS
Technical Manual
Lifting column cover
a) Drive the patient chair to its lowest position.
b) Detach the upper side of the lifting column cover by carefully bending it towards the chair.
c) Remove the lifting adapter by pulling it upwards.
d) Assemble the lifting column adapter into position in reverse order.
Cuspidor door
Door opening
limiter
M4x8 DIN 912
Cuspidor top cover
Door joint sleeve
1
2
3
4
Cuspidor cover
1
2
Lifting column cover
1
2
Side cover plate