Planmeca Compact I User Manual

Chapter B - CONTROL PANEL FUNCTIONS
Planmeca Compact i B-3
USER PROGRAMMING MODE
Technical Manual
Adjusting fibre
light intensity on
selected instru-
ment
4.4 “Fibre optic light
intensity” on page
B-6
Selecting expo-
sure time on
selected polymer-
ization light
4.5 “Polymerization
light exposure time”
on page B-6
Adjusting bowl
rinse and glass fill
times
4.6 “Duration of the
bowl rinsing and
duration of the glass
filling” on page B-7
Adjusting operat-
ing light intensity
4.7 “Intensity of the
operating light” on
page B-8
Adjusting extra
function (door/
nurse) signal dura-
tion
4.8 “Duration of the
extra function relay
activation” on page
B-8
FUNCTION KEY SEQUENCE
FOR DETAILS
REFER TO
Alternative method: press and hold

Planmeca Compact I Specifications

General

Spittoon	Yes
Operating Light	LED
Imaging Technology	Digital
X-ray Tube Voltage	60-70 kV
X-ray Tube Current	7 mA
Focal Spot Size	0.8 mm
Exposure Time Range	3.2 s
Power Supply	50/60 Hz