Polaris xp 2013 eps User Manual

2.43
MAINTENANCE
2
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
Shock Compression Adjustment
The compression damping adjustment is located on the
shock ‘Piggyback’ reservoir of each shock. Damping
adjustments can be made without using any tools.
NOTE: When the adjuster knob is turned counter-
clockwise until it stops, the damping is in the fully
open position (softest).
Turn the adjuster knob clockwise to increase compression
damping. Turn the adjuster knob counter-clockwise to
decrease compression damping.
NOTE: The recommended factory setting for the
front and rear shocks are provided in the following
compression adjustment tables.
Walker Evans™ 2.0" Front Shock:
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory 6 clicks from softest position
Firmest Full clockwise position
Adjuster
Knob
Front
Increase
Damping
Decrease
Damping
Shock
Walker Evans™ 2.5" Rear Shock:
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory 7 clicks from softest position
Firmest Full clockwise position
Adjuster
Knob
Increase
Damping
Decrease
Damping
Rear
Shock

Polaris xp 2013 eps Specifications

General

Brand	Polaris
Model	xp 2013 eps
Category	Utility Vehicle
Language	English