Polycom VVX 101 - Managing Calls with Your Bluetooth Headset; Disconnect and Remove Your Bluetooth Headset

Polycom VVX Business Media Phones User Guide
Polycom, Inc. 187
The following instructions are intended as a guide, and do not apply to all Bluetooth devices. You can usually
find instructions for your headset on the device manufacturer’s web site.
To enable, pair, and connect your Bluetooth headset to your phone:
1 Navigate to Settings > Basic > Bluetooth Settings > Bluetooth Radio.
The Bluetooth Radio screen is displayed.
2 Tap On.
The Bluetooth icon is displayed in the status bar. After the icon displays, you can pair and connect
your Bluetooth headset.
3 Turn your Bluetooth headset on and place the headset in Discovery mode.
Refer to your headset documentation for information on how to place your headset in discovery
mode.
4 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
5 Tap Scan to find your headset.
All nearby devices in discovery mode are added to the list, and a red Bluetooth icon is displayed
next to each unpaired headset.
6 Select your headset and tap Add to begin the pairing process.
After your headset is added, the Manage BT Headsets screen is displayed. Your headset is paired,
and the Bluetooth icon is displayed next to the headset.
7 Select your headset and select Connect.
The Bluetooth Headset icon is displayed next to your headset after the headset is paired and
connected. The Bluetooth Headset icon is also displayed in the status bar. If you select the icon, the
Bluetooth Settings screen is displayed.
You can now use your headset to handle calls.
Managing Calls with Your Bluetooth Headset
When your Bluetooth headset is turned on, paired, and connected with your phone, you can perform the
following tasks:
● Use the headset to handle calls, including muting and adjusting the call volume.
● Initiate and end calls on your headset by pressing the Headset key , or using a control on the
headset.
● Switch to handset or speakerphone mode during a headset call by picking up the handset or pressing
the Speakerphone key .
When you turn the headset off, the headset is no longer connected but remains paired to your phone. When
you turn the headset back on, the headset is reconnected.
Disconnect and Remove Your Bluetooth Headset
You can disconnect your headset from your phone, but still keep it paired. When you disconnect a headset,
it remains paired so you can easily connect it to your phone again.
You can also remove your headset so that it is no longer paired or connected. When you remove your
headset, it won’t display in the Manage BT Headsets screen. To connect it back to your phone, you’ll need
to scan for the device, add it, and connect it again.