LAN Connections
Plugging the right jack in the right socket
Your Mailing System uses a LAN (high speed internet connection) to connect to Neopost
secure servers.
Network/PC LAN (8 wires)
Follow the additional precautions below:
• Avoid using your system during an electrical storm; as there may be a risk of electrical
shock from lightning.
• Do not install LAN connectors in a wet location.
• Disconnect the LAN cable from the wall before moving your system.
Disconnecting your Mailing System
How to Disconnect your Mailing System
1. First switch your Mailing System to OFF mode (see How to Turn Your Mailing System
OFF on page 20).
Only unplug the power cord when the Mailing System is OFF or in
Sleep mode to avoid keeping the ink cartridge in an unprotected
position where the ink may dry out and become unusable.
2. Unplug the power cord from the wall outlet.
3. Unplug the LAN cable from their sockets as they may still be powered up.
8
| Page 8 | Jan-13-2017 10:32 |
1
Read this First
To Next Page
Loading...
Need help?
General
