5. Select a Weighing Mode.
Depending on the quantity and type of mail you have to process, you can choose an
efficient weighing method that uses the weighing platform to save time: see Choosing
a Weighing Mode on page 64.
To change the current weighing mode, press and select a weighing mode in the
Weighing mode screen.
For more details, see How to Change the Weighing Mode on page 66.
If the WP automatic selection is activated (see Weighing Platform
Automatic Selection on page 148), you can change, from the home
screen, the weighing mode to Standard Weighing (WP) by putting
a mail piece on the Weighing Platform.
You can also apply the optional setting(s):
1. Move the impression away from the envelope edge for thick envelopes: see How
to Move the Meter Impression (Print Offset) on page 70.
You are now ready to print.
Setting an Impression Memory for [Standard] Mail
To maximize the productivity of your Mailing System, consider using
Impression Memories. Impression Memories store your Impression
set-up together with the Postage Rate and, if activated, the Account
the postage is to be allocated to.To eliminate the set-up of repeated
job runs, simply save your job as an Impression Memory, for details
please see Using Impression Memories on page 71.
3
Processing Mail
35
| Page 35 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
