3. Remove the envelope from the WP and insert it into the mail path against the rear-guide
wall, with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener. Do not try to moisten self-adhesive envelopes.
If a mail piece is bigger than mail path maximum thickness, you
may use a label tape.To know the maximum thickness, see Mail
Specifications on page 207
4. The Mailing System prints postage and the mail piece is ejected.
In optional mode Differential Weighing ( ):
From the [Standard] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the instructions
on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack.The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3
Processing Mail
37
| Page 37 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
