quadient IN-360 User Manual

3. To print the impression, insert the mail piece into the base against the rear-guide wall,
with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener. Do not try to moisten self-adhesive envelopes.
If a mail piece is bigger than mail path maximum thickness, you
may use a label tape.To know the maximum thickness, see Mail
Specifications on page 207
4. The Mailing System applies postage and the mail piece (or label) is ejected.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it.You can answer
Yes or No.
In other modes (Manual Weight Entry , no weight ...):
From the [Standard] home screen:
1.
Press . System motors start running.
38
| Page 38 | Jan-13-2017 10:32 |
3
Processing Mail

quadient IN-360 Specifications

General

Brand	quadient
Model	IN-360
Category	Postal Equipment
Language	English