In this mode, each mail piece is manually placed on the Weighing Platform, and then
put into the mail path. If the Smart Start option is activated, you do not have to press
at each piece (see How to Activate / Deactivate Smart Start on page 144).
•
Differential Weighing (optional)
This mode speeds up the weighing process and increases your efficiency: all the
mail pieces are stacked together on the Weighing Platform. Remove the pieces one
by one and put them into the mail path.The Mailing System calculates the postage
and prints the mail piece automatically.You can leave all the mail pieces in a tray
on the Weighing Platform: the Mailing System will ask you to confirm printing for the
last item removed (from the tray).
Changing the Weighing Mode
At start-up, the default weighing mode is active.
See also
• To change the default weighing mode as supervisor, see How to Change the Default
Weighing Mode on page 147.
• To change the weighing mode according to the type of process you want to run (see
Choosing a Weighing Mode on page 64), follow the steps outlined below.
3
Processing Mail
65
| Page 65 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
