2. Select 'Account with Access Control'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
How to Display and Change the 'Account Mode'
To display and change the 'Account mode':
1. As supervisor (see How to Log in as Supervisor on page 241):
From the main menu, select the path: Account Management Account Mode
Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2. Select another 'Account mode'.
6
Accounts and Access Control
147
| Page 147 | Jun-22-2021 11:01 |
To Next Page
Loading...
