2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
If a mail piece is bigger than mail path maximum thickness, press to print a
label. The label is printed. To know the maximum thickness, see Mail Specifications
on page 367.
3. The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
When sealer is activated, collect the mail stack in the catch tray
and put stack aside to let envelopes dry.
To print several identical labels:
1.
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see Filling the Label
Dispenser on page 101).
2.
Press to print the labels.
50
| Page 50 | Jun-22-2021 11:01 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
