1. Make sure you are on the home screen of the [Pass Through] type of imprint.
The type of imprint is indicated at the top of the home screen as illustrated.
2. Check or change the type of imprint, if you are not in [Pass Through] mode.
Press to access the imprint screen:
To change the type of imprint, select Imprint type and then select [Pass Through]
in the Type of imprint screen. For more details, see How to Change the Current
'Type of Imprint' on page 39.
3.
Press to return to the home screen.
If you want to seal envelopes without printing you must turn
the sealer lever on: see Using the Sealing Function on page 97.
On the [Pass Through] home screen:
1.
Press . System motors start running.
3
Processing Mail
57
| Page 57 | Jun-22-2021 11:01 |
To Next Page
Loading...
Need help?
General
