5. Repeat the previous step of each piece of mail.
To quit the process at any time, press .
When you remove the last object from the WP, the Mailing
System asks if you want to print it. You can answer Yes or No.
This allows you to use a mail basket without having to declare
a tare on the WP.
In optional mode Differential weighing auto-tape ( )
From the home screen:
1. Place the stack of mail you want to process on the weighing platform, and then
follow the instructions on the screen or the steps below.
2. Remove the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen, starts motors and prints the label
automatically.
If you inadvertently remove more than one item from the WP,
replace removed items on WP before weight stabilisation to
avoid printing label (about 1.5 seconds).
3. Repeat the previous step of each piece of mail.
To quit the process at any time, press .
When you remove the last object from the WP, the Mailing
System asks if you want to print it. You can answer Yes or No.
This allows you to use a mail basket without having to declare
a tare on the WP.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
In optional mode Dynamic weighing ( )
3
Processing Mail
63
| Page 63 | Jun-22-2021 11:01 |
To Next Page
Loading...
