R&S ZNA67 - Page 1436

Command reference
R&S
®
ZNA
1436User Manual 1178.6462.02 ─ 20
Suffix:
<Ch>
.
Channel number
<Pt> Physical port number
Parameters:
<Usage> OFFSet | DEEMbed | OFF
OFFSet
Use the configured offset (--
>[SENSe<Ch>:]CORRection:EDELay[<Pt>] commands)
DEEMbed
Use the configured single-ended deembedding (-->
CALCulate<Ch>:TRANsform:VNETworks:SENDed:
DEEMbedding[<Pt>] commands)
OFF
Do not use the configured offset or the single-ended deembed-
ding network.
*RST:
OFF
Manual operation: See "ALC Deembedding" on page 480
SOURce:POWer:CORRection:SLEVeling...
The following commands define and control the (source) leveling function that is
enabled with option R&S ZNA-K8.
See Chapter 4.7.7.1, "Leveling", on page 254
SOURce:POWer<PhyPt>:CORRection:SLEVeling:DATA:CLEar
Deletes the leveling data for physical port <PhyPt>, if available.
Use SOURce:POWer:CORRection:SLEVeling:DATA:CLEar:ALL to delete the lev-
eling data for all ports.
Suffix:
<PhyPt>
.
Physical port number
Usage: Event
Options: R&S ZNA-K8
SOURce:POWer:CORRection:SLEVeling:DATA:CLEar:ALL
Deletes the leveling data for all physical ports.
Use SOURce:POWer<PhyPt>:CORRection:SLEVeling:DATA:CLEar to delete the
leveling data for a single port.
Usage:
Event
Options: R&S ZNA-K8
SCPI command reference