Ricoh Aficio 270 - Page 235

SERVICE PROGRAM MODE
SM 4-49 A265/A267
Service
Tables
Mode No.
Class
1 and 2
Class
3
Function Settings
Selects whether the PCU alarm message
(Change Photoconductor Unit) blinks when
the PCU alarm interval expires.
1
PCU Alarm Setting
(Display)
When installing the machine, if the customer
requires that the PCU alarm message blink,
select “1”. If set to “0”, there will be no
message.
0: No
1: Yes
Sets the PCU alarm interval.
5-912*
2
PCU Alarm Setting
(Interval)
When the machine reaches this value, the
PCU alarm will be displayed on the LCD to
inform the user. Only used if SP5-912-1 is at
“1”.
1~ 255
1k
copies/step
60k copies
Resets the user tool data.
5-913
UT Mode Data
Reset
Except for the user codes, key operator
code, and key operator printer counter.
Set this SP to 1. Then press down the
“Original Type” key and the “OK” key or
(
key at the same time to reset the data. If the
reset was successful, the beeper will sound
5 times. If it failed, the beeper will sound
only twice.
0: No
1: Yes
Selects whether the printer counter is
displayed in the LCD or not.
5-914*
Printer Counter
Display
If this is “0”, it does not display or print out in
the counter print out.
0: No
1: Yes
Asia and Taiwan versions only.
Select the default language of SP5-808.
5-916
Language UK/TW
Priority
This value will not reset when Memory All
Clear (SP5-801) is done.
0: UK (Asia
version)
1: TW
(Taiwan
version)
5-925
Serial Number
Display
Displays the serial number.
Press Clear mode key to exit.
Selects whether the fax mode key is
accepted when an SC has occurred.
5-930*
Fax Forwarding
Mode
When an SC occurs while there are
received fax messages in the SAF memory,
change the value to “1”. Then access
facsimile mode. Then forward the incoming
data to another fax machine by using the fax
mode bit switches.
0: No
1: Yes
5-932
BICU Software
Upload
(for designer)
This SP is for designers only. Do not
perform this SP.
0: No
1: Yes
5-933
BICU Software
Download
(for designer)
This SP is for designers only. Do not
perform this SP.
0: No
1: Yes
5-940*
Image Rotation
Mode
Selects whether the image can be rotated or
not.
0: Enabled
1: Disabled
5-941*
Duplex Blank Page
Selects whether the blank page is made on
the front side or back side when duplex copy
mode is selected.
0: Back
Side
1: Front
Side