BIT SWITCHES
A265/A267 4-46 SM
Communication Switch 0B
No FUNCTION COMMENTS
4 Printout of the message when
acting as a Transfer Station
0: Disabled 1: Enabled
When the machine is acting as a Transfer Station,
this bit determines whether the machine prints the
fax message coming in from the Requesting
Terminal.
5
Action when there is no fax
number in the programmed
Quick/Speed dials which
meets the requesting
terminal’s own fax number
0: Transfer is disabled
1: Transfer is enabled
After the machine receives a transfer request, the
machine compares the last N digits of the
requesting terminal’s own fax number with all the
Quick/Speed dials programmed in the machine.
(N is the number programmed in communication
switch 0C.)
0: If there is no matching number programmed in
the machine, the machine rejects the transfer
request.
1: Even if there is no matching number
programmed in the machine, the machine accepts
the transfer request. The result report will be
printed at the transfer terminal, but will not be sent
back to the requesting terminal.
6-7
Not used Do not change the settings.
To Next Page
Loading...
