15. Wait for the machine to fill the print head ink tanks. This may take about 7 minutes.
After filling the print head ink tanks, check and adjust the carriage unit settings.
1.
Press [
/Menu].
2.
Select "Maintenance"> "Nozzle Check Pattern"> [#Enter].
• Print the Nozzle Check Pattern. Clean and flush the print heads if required.
3. Select "Head Position Adjust"> [#Enter].
• Adjust all resolutions; "High Speed", "Standard", "High Quality", and "Envelope".
4. Select "Adjust Paper Feed"> [#Enter].
• Adjust the paper feed setting.
5. Select "Registration"> [#Enter].
• Adjust all trays; "Tray 1", "Tray 2", "Tray 3", and "Bypass".
6. Press [Escape] to return to the first level of the menu, select "List/Test Print", and press [#Enter].
7. Print the color demo page and a system summary.
• Select "Color Demo Page" to print the color fish pattern.
• On the same level of the menu select "Config. Page" and press [#Enter]. Confirm that all the
settings have been initialized.
8. Press [Escape] until you see the "Ready" message.
This completes the carriage replacement procedure.
9. Switch the machine off.
4. Replacement and Adjustment
136
To Next Page
Loading...
Need help?
General