Display Humidity Reading Before Automatic Print Head Cleaning
7-003-014 HUMI:ACL:AL
Use this SP to display the temperature reading before capping operation used to
determine whether automatic print head cleaning is done after the printer returns
from idle mode.
Display Count: Ink Circulation Starting Time
7-004-001 START:SNDLQD:H1 Print Head 1 (C / K)
7-004-002 START:SNDLQD:H2 Print Head 2 (Y / M)
Use this SP to display the starting time of ink circulation sequence.
Display Count: Pump Suspension Starting Time
7-004-005 START:PM STOP:T1 Print Head Tank 1 (Cyan)
7-004-006 START:PM STOP:T2 Print Head Tank 2 (Black)
7-004-007 START:PM STOP:T3 Print Head Tank 3 (Yellow)
7-004-008 START:PM STOP:T4 Print Head Tank 4 (Magenta)
DNA This Series (J027/J028/J029/J034/J035)
Display Count: Time Length of Feed Pump Suspension with the Power On
7-005-001 STOP:PON PUMP:T1 Print Head Tank 1 (Cyan)
7-005-002 STOP:PON PUMP:T2 Print Head Tank 2 (Black)
7-005-003 STOP:PON PUMP:T3 Print Head Tank 3 (Yellow)
7-005-004 STOP:PON PUMP:T4 Print Head Tank 4 (Magenta)
DNA This Series (J027/J028/J029/J034/J035)
SP Mode Service Tables
71
To Next Page
Loading...
Need help?
General