2. Installation
Preparation
Environment
• White area: Permissible Range
•
Blue area: Recommended Range
Set up the machine in a location that meets these minimum requirements:
Temperature Range: 10
o
C to 32
o
C (50F to 89.6F)
Humidity Range: 15% to 80% RH
Ambient Illumination: Less than 2,000 Lux (never expose to direct sunlight).
Choosing a Location
1. Always install the machine:
•
On a sturdy, level surface.
• Where it will not become damp.
2. Make sure the machine is never exposed to:
• Extreme changes from low to high temperature or high to low temperature.
• Cold or cool air directly from an air conditioner.
• Heat from a space heater.
3. Never install the machine in areas near:
25
To Next Page
Loading...
