6. Click [OK].
7. Updating starts.
8.
Do not switch the machine off while updating.
9. The machine is switched back on automatically.
10. After updating, check the version, and then click [Finish].
Bidirectional-Disabled
This section explains how to update the bidirectional-disabled printer driver.
To update the firmware when bidirectional communication is disabled, read "Update Cautions", and
then check the following:
•
You must be able to view the machine's control panel.
• The procedure requires you to check the machine's status on the control panel. Make sure you are
able to view the machine's control panel when updating the firmware.
• Check the current firmware version and the firmware version you want to install. Take care to install
only firmware versions that are later than the version that is already installed.
1. Double-click [Product Name_VX.XX_g_upd.exe] to start the update.
Product Name represents the machine name; VX.XX, the version.
Firmware Updates
185
To Next Page
Loading...
Need help?
General