SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93200 D
Thermal error in the DRV circuit
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93300 D
HRB fuse blown
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93400 D
HRB version not matching
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93500 D
The maximum number of sheets that can be printed by the prototype control
board has been exceeded.
Turn the main power switch off and then back on.
*
1
Only for full color models (J027/J028/J029)
Jam Codes
Depending on the paper jam location, the branch number (-xx) is displayed to identify the paper jam
location more precisely. The JAM code does not appear on the machine's panel display. Check it on the
printer driver's Status Monitor.
Here is a list of jam codes and what they mean. A separate list is provided for each machine.
Jam Codes
In the tables below "Action 1" and "Action 2" have the following meanings:
6. Troubleshooting
226
To Next Page
Loading...
