5. After checking the following, click [OK].
•
A functional machine has been selected.
• The machine is not offline.
• The machine is available and not currently inactive.
• There are no remaining print jobs displayed on the task bar.
• Check the control panel for the next step.
6. Check that the message "Waiting for Data" is displayed on the machine’s control panel.
7. Click [OK].
8.
Updating starts.
Check the update progress displayed on the LCD of the machine’s control panel.
When the "Ready" message appears, the machine is ready to print.
The progress of the update is displayed on the LCD of the machine’s control panel in the following
order.
Firmware Updates
187
To Next Page
Loading...
Need help?
General