Error Type Description Main Error
Warning Condition
The machine can print, but the warning
message is issued to the operator
because the machine will stop printing
if the condition is left unattended and
not corrected.
• Left ink sump near full
•
Ink collector unit near full
• Ink low
• Print head maintenance failed
• Temperature out of operation
range
• Ink filling
Abnormal
Conditions
An abnormal condition exists that
prevents the machine from printing. The
machine cannot print until the condition
has been corrected. Once the condition
has been corrected, the machine can
resume printing without cycling the
machine off/on. The corrective
measures can be done by the operator
to restore operation.
• Ink cartridge empty (printing
possible)
•
Ink cartridge empty (printing not
possible)
• Ink end print error
• Used ink cartridge
• Ink collector unit full
• Used ink collector unit
• Paper jam
• Confirmation after re-filling
• Cover Open
• Unit not detected
• Paper jam
• Print Cartridge(s) Not
Detected/Cover Open
• Paper size or paper type
mismatch error
• Paper size error
• No paper present
• Temperature out of operation
range
Troubleshooting Guide
201
To Next Page
Loading...
