SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20351 D
Failure to form negative pressure in the ink supply unit (misalignment (failure to
detect by the feeler) / occasional failure to release air) (Tank 1 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20352*
1
D
Failure to form negative pressure in the ink supply unit (misalignment (failure to
detect by the feeler) / occasional failure to release air) (Tank 2 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20353*
1
D
Failure to form negative pressure in the ink supply unit (misalignment (failure to
detect by the feeler) / occasional failure to release air) (Tank 3 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20354*
1
D
Failure to form negative pressure in the ink supply unit (misalignment (failure to
detect by the feeler) / occasional failure to release air) (Tank 4 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20400 D
The drive switching motor is not in the home position.
Turn the main power switch off and then back on.
Error Codes
217