Offline
The machine is offline. By closing the menu and switching to an online status, the machine becomes
able to print.
Out of Printable Temperature Range
•
Room to cold or too warm?
1. Printer must be located where the temperature range is 10 to 32°C (50 to 89.6°F)
2. Turn the printer off and allow it to cool.
• If humidity is higher than 54%, the high end of the temperature range will be lower. The
printer will not return to standby mode until it has acclimated to the room temperature. Wait
for the Power lamp to stop flashing.
Paper Misfeed
Paper is jammed. Check the jam code (JAM##-##) to solve the problem.
Paper Size Mismatch
The size of paper in the selected tray does not match the size of the paper selected for the job, or
the specified Tray Paper Size setting in the Paper Input menu does not match the actual paper size.
Follow the procedure below:
•
Check the paper cassette and make sure that the paper size matches the settings selected in
the printer driver.
• Press the [Form Feed] key, select a paper tray containing paper of the specified size, and then
print.
• Cancel the print job.
Paper Type Mismatch
The type of paper in the selected tray does not match the size of the paper selected for the job
Follow the procedure below:
• Check the paper cassette and make sure that the paper type matches the settings selected in
the printer driver.
• Press the [Form Feed] key, select a paper tray containing paper of the specified type, and
then print.
• Cancel the print job.
Paper Size and Type Mismatch
The type and size of paper in the selected tray does not match the type and size of the paper
selected for the job, or the type and size of the paper in any of the paper trays does not match the
type and size of the paper selected for the job when using Auto Tray Select.
Follow the procedure below:
Error Codes
243
To Next Page
Loading...
