Menu/Menu Item Function
Tray Priority You can specify the prioritized paper tray. This setting appears only if the
paper feed unit or multi bypass tray is attached.
List/Test Print
Config.Page(*) Prints information that tells you the current configuration of the printer.
• System Reference. Lists printer version, attached options, name of print
language, amount of ink remaining for each ink cartridge.
• Paper Input. Lists the specified Tray Priority setting and the Paper Input
menu settings.
• Host Interface, Interface Information. Lists the settings of the Host
Interface menu
Color Demo Page *2 Prints a color sample.
Error Log Prints list of most recent errors.
PCL Config. Page *1 Lists current PCL configuration
Maintenance
Nozzle Check(*) Prints the cross-hatch test pattern so you can visually confirm whether inks are
ejecting correctly from the print head.
Head-cleaning(*) Cleans the print head. Clean the print head when certain colors are missing
or printing faintly. Head cleaning consumes ink.
Head-flushing(*) Cleans the print head more thoroughly than "Head-cleaning". Flushing
consumes more ink. Use this function only after "Head-cleaning" fails to solve
the problem.
Head Position(*) Adjusts the alignment of the print head if the Nozzle Check test pattern
shows broken vertical lines, or if printed images are blurred.
Adj. Paper Feed(*) Adjusts the paper feed setting if the Nozzle Check test pattern shows
horizontal misalignment, or if printed images appear uneven.
Registration Adjusts the print starting point for each paper tray. Use the Nozzle Check
test pattern as reference.
Date/Time Allows setting current date/time.
Key Repeat Enables/disables repetition of a key pushed and held down on the
operation panel.
Using the Operation Panel
33
To Next Page
Loading...
Need help?
General