Never remove the ink collector unit unless it requires replacement. A message will appear and tell you
that the ink collector unit needs to be replaced.
•
You will need a self-sealing plastic bag to hold the ink collector unit.
• When you dispose of the used ink collector unit always obey the local laws and regulations
regarding the disposal of such items.
At any time you can determine if the ink collector unit needs to be replaced.
• Never attempt to clean and re-use an ink collector unit.
To remove the ink collector unit:
1. Gently touch the right front cover to release and open it.
2.
Pull the ink collector unit [A] out.
3. The ink collector [A] is completely enclosed to prevent leakage.
4.
If you are replacing the ink collector unit, insert the new one.
5. Push in the ink collector [B] until you hear it snap and lock in place.
6. Close the right front cover.
• The ink collector unit has an internal ID chip that automatically resets the counter for the ink
collector unit. No SP adjustment is required.
7.
Discard the used ink collector unit.
• Obey the local laws and regulations regarding disposal of items like the full ink collector unit.
•
Never attempt to open and clean a full ink collector unit and use it again.
Common Procedures
49
To Next Page
Loading...
Need help?
General