Envelope Setting
You can select the type of envelope.
Default: [Envelope 3]
• Envelope 1
• Envelope 2
• Envelope 3
• Envelope 4
Replacement Alert
Use this function to specify the timing of when the Alert Indicator will light up to prompt the user to
replace supplies.
• Print Cartridge/Maint. Kit
Default: [Normal]
• Notify Sooner
• Normal
• Notify Later
Display Supply Info
You can select whether or not the amount of toner is displayed on the initial screen.
Default: [On]
• On
• Off
Menu Protect
You can select whether or not to protect the menu settings. If you enable this setting, you must specify
a protection level.
If you would like to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
Default: [Level 2]
• Level 1
• Level 2
• Off
List/Test Print Lock
You can select whether or not to prohibit List/Test printing.
You may not be able to change this setting depending on the setting of the printer.
Default: [Off]
• On
4. Making Printer Settings Using the Control Panel
98
To Next Page
Loading...
