Default: [TBCP]
When using an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using the control panel
is Binary Data.
• The printer driver data format is binary and the data format selected using the control panel
is TBCP.
Resolution
Select the resolution.
Default: [600dpi Fast]
• 300dpi
• 600dpi Fast
• 600dpi Standard
Orientation Auto Detect
Specify the orientation auto detect.
Default: [On]
• On
• Off
PDF Menu
You can set conditions when using PDF for printing.
Change PDF Password
Specify the password for the PDF file executing PDF Direct Print. If you do not set a PDF password,
this menu does not appear. The password can be set using Web Image Monitor, but must be
sent through the network. For increased security, use this menu on the control panel to set the
password directly.
PDF Group Password
This setting is not available on this printer.
Reverse Order Printing
This setting enables printing to start from the last page of the document. Use this function when
prints come out face up in the output tray. This allows a printed document to be assembled in
page order.
Default: [Off]
• On
• Off
Resolution
Specify the resolution for the PDF file executing PDF Direct Print.
Print Settings Menu
117
To Next Page
Loading...
Need help?
General