Ricoh Aficio SP 5200DN - Page 444

• Active
• Inactive
• NetWare
Default: [Inactive]
• Active
• Inactive
• SMB
Default: [Active]
• Active
• Inactive
• AppleTalk
Default: [Inactive]
• Active
• Inactive
Ethernet Speed
Specify the network speed to operate the printer.
Default: [Auto Select]
• Auto Select
• 10Mbps Half Duplex
• 10Mbps Full Duplex
• 100Mbps Half Duplex
• 100Mbps Full Duplex
IEEE802.1X Auth.(Ethernet)
Specify IEEE 802.1X Ethernet authentication. For details about IEEE 802.1X authentication, see
"Configuration", Hardware Guide.
Default: [Inactive]
• Active
• Inactive
Restr.IEEE802.1X Auth.Def.
Restore the default IEEE 802.1X setting.
LAN Type
Select Ethernet or Wireless LAN. This menu appears only when the optional Wireless LAN
interface unit is installed.
Default: [Ethernet]
4. Making Printer Settings Using the Control Panel
130
4