Bidirectional Comm.
Specify whether to enable or disable bi-directional communication.
Default: [On]
• On
• Off
Wireless LAN
Configure settings for Wireless LAN. This menu appears only when the optional Wireless LAN interface
unit is installed.
Communication Mode
Specify the transmission mode for Wireless LAN.
Default: [Infrastructure Mode]
• 802.11 Ad-hoc Mode
• Infrastructure Mode
SSID Setting
Specifies SSID to distinguish the access point in [Infrastructure Mode] or [802.11 Ad-hoc Mode].
The characters that can be used are ASCII 0x20-0x7e (32 bytes).
If blank is specified in [802.11 Ad-hoc Mode], "ASSID" appears.
Ad-hoc Channel
Specify the channel to use when [802.11 Ad-hoc Mode] has been selected. Set the channel
that matches the type of wireless LAN being used. The channel in use might differ depending on
the country.
The following channels are available:
(mainly Europe and Asia)
• IEEE 802.11a/b/g Wireless LAN
Frequency range:
2412 - 2472 MHz (1 - 13 channels)
5180 - 5240 MHz (36, 40, 44, and 48 channels)
In some countries, only the following channels are available:
• IEEE 802.11b/g Wireless LAN
Frequency range:
2412 - 2462 MHz (1 - 11 channels)
Default: [11]
(mainly North America)
• IEEE 802.11a/b/g Wireless LAN
4. Making Printer Settings Using the Control Panel
132
To Next Page
Loading...
