Setting Description Setting Value
Local Address
Specify the printer's address. If
you are using multiple
addresses in IPv6, you can also
specify an address range.
The printer's IPv4 or IPv6
address.
If you are not setting an address
range, enter 32 after an IPv4
address, or enter 128 after an
IPv6 address.
Remote Address
Specify the address of the IPsec
transmission partner. You can
also specify an address range.
The IPsec transmission partner's
IPv4 or IPv6 address.
If
you are not setting an address
range, enter 32 after an IPv4
address, or enter 128 after an
IPv6 address.
Transmission Using IPsec
107
To Next Page
Loading...
Need help?
General