Parameter Value configured
wpaauth {wpapsk | wpa | wpa2psk | wpa2 } You can specify the WPA authentication mode
when using WPA encryption.
wpapsk: WPA-PSK authentication (default)
wpa: WPA (802.1X) authentication
wpa2psk: WPA2-PSK authentication
wpa2: WPA2 authentication
psk "character string" You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap,
mschap, mschapv2, pap, md5, and tls are
settings for the phase 2 method, and one of these
must be specified if EAP-TTLS or PEAP is selected.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
username "character string" You can specify the login user name for the
Radius server.
Usable
characters: ASCII 0x20-0x7e (31 bytes)
other than "@". The default is blank.
username2 "character string" You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable
characters: ASCII 0x20-0x7e (31 bytes)
other than "@". The default is blank.
Using telnet
75
To Next Page
Loading...
Need help?
General