Rohde & Schwarz ESW Series - Laying out the Result Display with the Smartgrid

Common Analysis and Display Functions
R&S
®
ESW
191User Manual 1177.6298.02 ─ 08
– Chapter 9.3.3, "Performing a Scan", on page 114
●
IF analysis
– "IF Analysis" on page 110
– "IF Analysis" on page 181
●
Spectrogram (for scan and IF analysis)
– Chapter 11.3.1.3, "Working with Spectrograms", on page 204
– Chapter 11.3.6, "Spectrogram Settings", on page 215
●
Marker table
– "Marker information in marker table" on page 228
●
Peak list
– Chapter 9.3.4, "Performing a Peak Search", on page 122
●
Final measurement
– "Final Measurement" on page 110
– Chapter 9.3.5, "Performing Final Measurements", on page 130
●
Preselector
– Chapter 10.6.2, "Configuring the Preselector", on page 149
●
Fast access
– Chapter 10.2, "Using the Fast Access Panel", on page 142
●
User port
– Chapter 10.3, "Using the User Port Panel", on page 144
●
Notes
– Chapter 10.4, "The Notes Display", on page 145
For more information about the SmartGrid in general, see Chapter 6.5.2, "Laying out
the Result Display with the SmartGrid", on page 74.
11.1.2 Laying out the Result Display with the SmartGrid
Measurement results can be evaluated in many different ways, for example graphically,
as summary tables, statistical evaluations etc. Each type of evaluation is displayed in a
separate window in the channel tab. Up to 16 individual windows can be displayed per
channel (i.e. per tab). To arrange the diagrams and tables on the screen, the Rohde &
Schwarz SmartGrid function helps you find the target position simply and quickly.
Principally, the layout of the windows on the screen is based on an underlying grid, the
SmartGrid. However, the SmartGrid is dynamic and flexible, allowing for many different
layout possibilities. The SmartGrid functionality provides the following basic features:
●
Windows can be arranged in columns or in rows, or in a combination of both.
●
Windows can be arranged in up to four rows and four columns.
●
Windows are moved simply by dragging them to a new position on the screen, pos-
sibly changing the layout of the other windows, as well.
●
All evaluation methods available for the currently selected measurement are dis-
played as icons in the evaluation bar. If the evaluation bar contains more icons
Result Display Configuration