Rohde & Schwarz ESW Series - The Rear Panel

Instrument Tour
R&S
®
ESW
52User Manual 1177.6298.02 ─ 08
Provides the measurement functions, for example:
●
the bargraph measurement (receiver application)
●
the scan and final measurement (receiver application)
●
the AF demodulation (receiver application)
●
IF analysis
●
the channel power and ACLR measurement (spectrum application)
●
the occupied bandwidth measurement (spectrum application)
●
the Spectrum Emission Mask (SEM) measurement (spectrum application)
●
the spurious emission measurement (spectrum application)
●
the signal statistics (spectrum application)
Provides functionality to configure the measurement.
Provides functionality to control display and limit lines.
Provides functionality to configure inputs and outputs.
Starts a measurement in single measurement mode.
Starts a measurement in continuous measurement mode.
5.2 The Rear Panel
The rear panel contains various connectors as shown in Figure 5-2.
1 23 4 5 8 9 10127 11 6
Figure 5-2: Rear panel of the R&S
ESW
The Rear Panel