Common Analysis and Display Functions
R&S
®
ESW
213User Manual 1177.6298.02 ─ 08
Export Trace to ASCII File
Opens a file selection dialog box and saves the selected trace in ASCII format (.dat)
to the specified file and directory.
"File Explorer": Instead of using the file manager of the R&S ESW firmware, you can
also use the Microsoft Windows File Explorer to manage files.
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
If the spectrogram display is selected when you perform this function, the entire histo-
gram buffer with all frames is exported to a file. The data for a particular frame begins
with information about the frame number and the time that frame was recorded. For
large history buffers the export operation can take some time.
Remote command:
MMEMory:STORe<n>:TRACe on page 617
11.3.4 Copying Traces
Access: "Overview" > "Analysis" > "Traces" > "Copy Trace"
The remote commands required to copy traces are described in Chapter 15.7.3.3,
"Traces Copy", on page 529.
Copy Trace..................................................................................................................213
Copy Trace
Access: "Overview" > "Analysis" > "Traces" > "Copy Trace"
Copies trace data to another trace.
Remote command:
TRACe<n>:COPY on page 529
11.3.5 Trace Mathematics
Access: "Overview" > "Analysis" > "Traces" > "Trace Math"
Trace mathematics allow you to combine the data of several traces and write the
results to a new trace.
Trace Configuration
To Next Page
Loading...
