Rohde & Schwarz ESW Series - Configuration Overview

Common Measurement Settings
R&S
®
ESW
146User Manual 1177.6298.02 ─ 08
The content of the "Notes" display can also be included in test reports, see Chap-
ter 12.8.2, "Creating a Test Report", on page 298.
Remote commands:
Add notes display: LAYout:ADD[:WINDow]? on page 518
Set and query content: DISPlay[:WINDow<n>][:SUBWindow<w>]:NOTes:TEXT
on page 605
Append content: DISPlay[:WINDow<n>][:SUBWindow<w>]:NOTes:APPend:
TEXT on page 604
Clear notes display: DISPlay[:WINDow<n>][:SUBWindow<w>]:NOTes:CLEar
on page 605
10.5 Configuration Overview
Throughout the measurement channel configuration, an overview of the most important
currently defined settings is provided in the configuration "Overview". The configuration
overview is displayed when you select the "Overview" softkey, which is available at the
bottom of all softkey menus.
In addition to the main measurement settings, the configuration overview provides
quick access to the main settings dialog boxes. Thus, you can easily configure an
Configuration Overview