Rohde & Schwarz ESW Series - Changing the Size of Windows

Operating the Instrument
R&S
®
ESW
78User Manual 1177.6298.02 ─ 08
A blue area shows where the window will be placed.
3. Move the window until a suitable area is indicated in blue.
4. Drop the window in the target area.
The windows are rearranged to the selected layout, and "Delete" and "Move" icons
are displayed in each window.
5. To close a window, select the corresponding "Delete" icon.
Remote command:
LAYout:REPLace[:WINDow] on page 520 / LAYout:WINDow<n>:REPLace
on page 523
6.5.3 Changing the Size of Windows
Each channel tab may contain several windows to evaluate the measurement results
using different methods. A "splitter" allows you to change the size of neighboring win-
dows.
The splitters are not available in SmartGrid mode.
Displaying Results