Rohde & Schwarz ESW Series - Frequency and Span Information in Diagram Footer; Instrument and Status Information

Operating the Instrument
R&S
®
ESW
62User Manual 1177.6298.02 ─ 08
Label Information
"Wnd" Window type the marker is positioned in.
"Type" Marker type: N (normal), D (delta), T (temporary, internal)
"Ref" Reference (for delta markers)
"Trc" Trace to which the marker is assigned
"X-value" x-value of the marker
"Y-value" y-value of the marker
6.1.4 Frequency and Span Information in Diagram Footer
The information in the diagram footer (beneath the diagram) depends on the current
application.
The contents depend on the application and the result display.
Label Information
CF Center frequency
Span Frequency span (frequency domain display)
ms/ Time per division (time domain display)
Pts Number of measurement points or (rounded) number of currently displayed
points in zoom mode
Start Start frequency of the scan
Stop Stop frequency of the scan
6.1.5 Instrument and Status Information
Global instrument settings and functions (such as LXI configuration mode), the instru-
ment status and any irregularities are indicated in the status bar beneath the diagram.
In the MultiView tab, the status bar always displays the information for the currently
selected measurement.
The following information is displayed:
Understanding the Display Information