Rohde & Schwarz ESW Series - Selected Marker;Marker State; Marker Position X-Value; Marker State; Selected Marker

Common Analysis and Display Functions
R&S
®
ESW
231User Manual 1177.6298.02 ─ 08
11.4.2.1 Individual Marker Setup
Access: "Overview" > "Analysis" > "Marker" > "Markers"
Up to 17 markers or delta markers can be activated for each window simultaneously.
Initial marker setup is performed using the "Marker" dialog box.
The markers are distributed among 3 tabs for a better overview. By default, the first
marker is defined as a normal marker, whereas all others are defined as delta markers
with reference to the first marker. All markers are assigned to trace 1, but only the first
marker is active.
Selected Marker..........................................................................................................231
Marker State................................................................................................................231
Marker Position X-value..............................................................................................231
Frame (Spectrogram only).......................................................................................... 232
Marker Type................................................................................................................ 232
Reference Marker....................................................................................................... 232
Assigning the Marker to a Trace................................................................................. 232
Select Marker..............................................................................................................232
All Markers Off.............................................................................................................233
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:MARKer<m>[:STATe] on page 540
CALCulate<n>:DELTamarker<m>[:STATe] on page 538
Marker Position X-value
Defines the position (x-value) of the marker in the diagram. For normal markers, the
absolute position is indicated. For delta markers, the position relative to the reference
marker is provided.
Marker Usage