Preparing for Use
R&S
®
ESW
42User Manual 1177.6298.02 ─ 08
The secure user mode setting and automatic login is automatically deactivated when
the "Instrument" user logs on. The "SecureUser" is no longer available.
For administrators ("Instrument" user), the secure user mode setting is available in the
general system configuration settings (see "SecureUser Mode" on page 340).
Remote control
Initially after installation of the R&S ESW-K33 option, secure user mode must be
enabled manually once before remote control is possible.
(See SYSTem:SECurity[:STATe].)
This is necessary to prompt for a change of passwords.
Protecting Data Using the Secure User Mode
To Next Page
Loading...
