Network and Remote Operation
R&S
®
ESW
422User Manual 1177.6298.02 ─ 08
2.
Select the "Windows" icon in the toolbar to access the operating system.
3. In the Windows "Start" menu, select "Settings > System".
4. Search for "remote access".
5. Select "Allow remote access to your computer".
6. Define which users are to be given access to the R&S ESW via Remote Desktop.
Note: The user account under which configuration is carried out is automatically
enabled for Remote Desktop.
a) Select the "Select Users" button.
b) Select the users or create new user accounts as described in Chapter 14.5.3.1,
"How to Create Users", on page 417.
c) Select "OK" to confirm the settings.
7. The R&S ESW is now ready for connection setup with the Remote Desktop pro-
gram of the controller.
How to Set Up a Network and Remote Control
To Next Page
Loading...
