Instrument Tour
R&S
®
ESW
45User Manual 1177.6298.02 ─ 08
1 = Toolbar: contains general functionality of the firmware (print, save etc.).
2 = Channel tabs: each tab contains a measurement channel.
3 = Channel bar: shows measurement settings and allows you to change those settings easily.
4 = Input field.
5 = Window title bar: contains diagram-specific (trace) information.
6 = Result display: contains the measurement results.
7 = Diagram footer: contains diagram-specific information.
8 = Status bar: contains system messages, progress bar and date and time.
9 = Softkeys: provide access to measurement functions.
A touchscreen is a screen that is touch-sensitive, i.e. it reacts in a specified way when
a particular element on the screen is tapped by a finger or a pointing device, for exam-
ple. Any user interface elements that can be clicked on by a mouse pointer can also be
tapped on the screen to trigger the same behavior, and vice versa.
Using the touchscreen, the following tasks (among others) can be performed by the tap
of your finger:
●
Changing a setting
●
Changing the display
●
Moving a marker
●
Zooming into a diagram
●
Selecting a new evaluation method
●
Scrolling through a result list
●
Saving or printing results and settings
To imitate a right-click by mouse using the touchscreen, for example to open a context-
sensitive menu for a specific item, press the screen for about 1 second.
The Front Panel
To Next Page
Loading...
