Remote Commands in the Receiver Application
R&S
®
ESW
674User Manual 1177.6298.02 ─ 08
DIAGnostic:SERVice:SINFo?
This command creates a *.zip file with important support information. The *.zip file con-
tains the system configuration information ("device footprint"), the current eeprom data
and a screenshot of the screen display (if available).
This data is stored to the C:\R_S\Instr\User directory on the instrument.
As a result of this command, the created file name (including the drive and path) is
returned.
You can use the resulting file name information as a parameter for the MMEM:COPY
command to store the file on the controller PC.
If you contact the Rohde&Schwarz support to get help for a certain problem, send this
file to the support in order to identify and solve the problem faster.
Return values:
<FileName> C:\R_S\Instr\User
\<R&S Device ID>_<CurrentDate>_<CurrentTime>
String containing the drive, path and file name of the created
support file, where the file name consists of the following ele-
ments:
<R&S Device ID>: The unique R&S device ID indicated in the
"Versions + Options" information
<CurrentDate>: The date on which the file is created
(<YYYYMMDD>)
<CurrentTime>: The time at which the file is created
(<HHMMSS>)
Example:
DIAG:SERV:SINF?
Result:
"c:\R&S\instr\user\FSW-26_1328.4100K26-100005-xx_20130116_165858.zip"
MMEM:COPY "c:\R&S\instr\user\ESW-26_
1328.4100K26-100005-xx_20130116_165858.zip",
"S:\Debug\ESW-26_1328.4100K26-100005-xx_
20130116_165858.zip"
Usage: Query only
Manual operation: See "Create R&S Support Information" on page 342
SYSTem:PASSword:RESet
Clears any previously provided password and returns to the most restrictive service
level.
Manual operation:
See "Password" on page 346
SYSTem:PASSword[:CENable] <arg0>
Provides a password for subsequent service functions.
General Instrument Setup
To Next Page
Loading...
